What does the color of the LED light on my SWARM Vibration mean?

The SWARM Vibration is starting up.

Solid purple, white, purple to red

The SWARM Vibration is trying to make connection

Breathing orange

The SWARM Vibration is auto-leveling. This takes ten seconds.

Blinking blue / black

The SWARM Vibration is measuring but has no server contact. *When the SWARM Vibration is factory default it won’t be measuring during breathing orange/white.

Breathing orange / white

The SWARM Vibration is measuring and has server contact via 3G/4G/LTE.

Breathing green / white

The SWARM Vibration is measuring and has server contact via WiFi.

Breathing green / purple

The SWARM Vibration is measuring and has server contact via the PoE adapter.

Breathing green / cyan

The SWARM Vibration is downloading guideline filters.

Breathing cyan / black

The SWARM Vibration is going to sleep (outside the scheduled measurement hours).

Blinking green / black

The SWARM Vibration performs a firmware upgrade.

Rapidly flashing blue / black

Blinking red / black - The SWARM Vibration is disturbed during auto-leveling. Make sure the SWARM Vibration is securely tightened to the wall and then initiate another auto-leveling from the measuring point overview page on the Honeycomb platform.

Blinking red / black

Low voltage detected, measurement quality might be impaired. Please check if the battery has enough charge and the power supply can deliver enough power for the SWARM Vibration to operate properly.

Blinking orange / black

Please contact us via the chat at the bottom right of this page or via support@omnidots.com.

Breathing red / black